tcpGPS
GNSS working mode assistant screen - GPS v2
2.2 GNSS working mode assistant screen
This screen (Figure 4) has available four options for configuring the working mode on our GNSS receiver:
Rover. GNSS rover configuration for collecting data.
Base. GNSS base configuration for sending corrections to all GPS connected as rover to that base.
Static. It allows to configure the GNSS to start and stop a static measurement of the current point.
Constellations. It allows to select the constellations you want to use in your measures.
Depending on the features and available resources of each GNSS model, these options will be enabled or disabled.