tcp PointCloud Editor
Profile - PCE
9.7 Profile
Location
- Ribbon menu
- Alignments and Profiles
- PROFILES
- Profile
Description
This command generates a profile of points from the selected alignment.
Parameters
| Name | Meaning |
|---|---|
| Models | Checked if you want to use grids and surfaces for the generation of profiles |
| Point Clouds | Checked if you want to use point clouds for the generation of profiles |
| 3D Models | Checked if you want to use 3D models for the generation of profiles |
| 3D Entities Cuts | Checked if you want to use 3D entities for the generation of profiles |
| Initial Station | The initial station of the cross sections |
| Final Station | The final station of the cross sections |
| Symmetrical Bandwidth | If checked, the left and right bandwidths will be the same |
| Left Bandwidth | Bandwidth of the left side of the alignment |
| Right Bandwidth | Bandwidth of the right side of the alignment |
Remarks
-
An alignment must be selected to use this command.
-
Once the profile is generated, the Profile Editor will be shown.