tcpMDT
In this section
- Introduction - MDT25MDT incorporates new functionalities for the Road Layout, especially in terms of alignment integration and design. The program encompasses…
- [PRO] calculate - MDT25This command allows an alignment to be edited based on the elements that define it. Upon executing the command, an alignment can be…
- Lines - MDT25In addition to the Calculate command, MDT includes commands from this previous version. These commands can be used to edit an element or…
- Isolated straight line - MDT25This command enables a line to be drawn independently. In other words, without it belonging to any alignment or being related to any road…
- Line between curves - MDT25This command allows one to draw a straight section that joins together two circular curves, so that the straight line is tangential to…
- Isolated curve - MDT25This command enables a circular curve to be drawn independently. In other words, a curve which does not belong to any alignment and is not…
- Curve by origin and centre - MDT25This option draws a circular curve on the basis of three points. The first is the curve's initial point, the second its center and the…
- Point curve - MDT25This command draws a circular curve which passes through three points. Although the same result may be obtained by drawing an arch…
- Curve tangent to two lines or curves - MDT25This command enables a circular curve to be inserted between two straight line or curve-type elements, so that the initial and final…
- Isolated clothoid - MDT25This command enables a clothoid to be drawn independently. In other words, a clothoid which does not belong to any alignment and is not…
- Clothoid curve clothoid between lines - MDT25This command enables a clothoid, circular curve and clothoid sequence to be inserted between straight lines, so that the initial and final…
- Clothoid clothoid between lines - MDT25This command allows a sequence of two clothoids (also known as a vertex clothoid) to be inserted between two straight lines, so that the…
- Clothoid line clothoid between curves - MDT25This command enables a clothoid, straight line and clothoid sequence to be inserted between two circular curves, so that the initial and…
- Clothoid clothoid between curves - MDT25This command enables a sequence of two clothoids to be inserted between two circular curves, so that the set's initial and final points…
- Clothoid between two curves - MDT25This command enables the transition clothoid to be inserted between two circular curves. For this clothoid to exist, the curve having the…
- Tangent to line and curve - MDT25This command enables a clothoid to be inserted between a straight line and a circular curve.
- Tangent to line and end point - MDT25This command enables a clothoid to be inserted after a straight line. Although the clothoid maintains the same azimuth, it ends at an…
- Draw elements - MDT25This command enables users to choose the most suitable calculation method to draw the alignments desired. By clicking on the desired icon…
- Edit - MDT25This command permits road element parameters to be modified, whether or not they belong to an alignment. In the cases of straight lines…
- Delete - MDT25Although a road design element may be directly deleted in CAD, this command is included to make it easier to delete a grouping of…
- Split - MDT25An alignment element (straight line, curve or clothoid) may be split into two parts through this command. Once the element has been…
- Join - MDT25This command is the opposite of Split Alignment. Two consecutive road design elements of the same type (straight lines, curves or…
- Copy - MDT25Although CAD may be used directly to copy a road design element, information on its grouping with other elements is not recorded in this…
- Displace - MDT25Although CAD commands can be used to adjust a road design element, this command makes it possible to move complete groups much more…
- Rotate - MDT25Although CAD commands can be used to rotate a road design element, this command enables whole groups to be rotated. One simply has to…
- Replace - MDT25This command enables a group of road design elements to be included within another group, thereby replacing elements of the section…
- Adapt to lines - MDT25This command extends two straight lines up to their intersection, deleting any intermediate elements. It may be applied to a horizontal…
- Elements library - MDT25The option exists of creating an alignment library where the different groups of road design elements may be stored. These elements may be…
- Connect elements - MDT25This command enables one road design element to be situated at the end of another element, so that the final point of the former coincides…
- Group elements - MDT25The possibility exists of grouping road design elements. With this command it is possible, for instance, to edit the length of one of…
- Ungroup elements - MDT25As its name indicates, this command enables alignment elements to be isolated. It may be performed on a group of alignments or on a…
- Convert to alignment - MDT25This command enables a horizontal alignment to be created from a group of road design elements. There are two operating modes: Designating…