tcpMDT Photovoltaic
In this section
- Create segments from trackers - PV25With that command we are going to generate the segments associated with the selected trackers. The segment is an essential file for each…
- Label slopes and elevation differences - PV25This option is very useful as it will allow you to create a slope and elevation difference plan from all the information about the…
- Trackers by slopes - PV25This option is very useful for listing and detecting those trackers that are in a certain range of slopes, the list can be generated…
- Optimize trackers - PV25Once the segments associated with each tracker have been generated, it is possible that some of them do not comply with the clearance…
- Recalculate profiles - PV25This tool allows us to update the longitudinal profile of the segment of the selected trackers. This option is particularly useful in the…
- Calculate volume - PV25This process can be applied to a single zone, or select multiple zones at once. In case of selecting a single zone, by default the initial…
- Calculate volume multiple simultaneous zones - PV25If you run the Calculate Volume command using the command-line options Multiple or All, the following window appears: This process has two…
- Raiselower trackers - PV25With this option we have the possibility to raise or lower the elevation of the selected tracker or trackers. The tracker elevation change…
- Elevatelower ends trackers - PV25This tool works in the same way as the previous option, but with the difference that it requests, iteratively, each of the trackers to…
- Raiselower adjacent trackers - PV25This option is a peculiarity of the previous command. In this case, it will initially ask us for the elevation increase and then the…
- Change slope tracker - PV25With this command we will be able to apply a certain slope to the selected tracker. Initially, the following window will appear in which…
- Change cross slope - PV25With this option we will have the possibility to change the cross slope between the trackers, when we execute this option, the following…
- Optimize north south coast difference - PV25This tool will automatically optimize the difference in elevation between two trackers that are in the same vertical. The optimization is…
- Adjust north south elevation difference - PV25This option will allow us to change the elevation difference between two trackers that are vertically aligned. It is particularly useful…
- Articulated optimize - PV25This command will allow us, only for articulated trackers, to automatically remove drift angles below the minimum deflection angle. In…
- Terrain following tracker edit joint - PV25This option will allow us to modify the selected drift angle of the articulated or flexible tracker. Initially it asks us to select the…
- Terrain following trackers edit elevation - PV25This option will allow us to modify the nominal grade level in the position of the selected joint. Initially, it is requested to designate…
- Terrain following trackers adjust joints - PV25This option will allow us to adjust the drift angles of the trackers automatically. Initially, it will ask us if we want to apply the…
- Terrain following trackers adjust slopes - PV25This option will allow us to automatically adjust the maximum slope of each section of the articulated tracker. Initially it requests the…
- Dual row trackers adjust restrictions - PV25This option is only applicable for duo tracker. When you run it, you enter the constraint you want to apply to the tracker. Maximum Slope…