tcpMDT
In this section
- Creating a surface - MDT26Select Surfaces > Create Surface (or Surfaces > Creation > Create Surface), or in the project window, right-click on Surfaces and Create…
- Editing the triangulation - MDT26As an editing example, we will modify the joining of triangles in a given area. Thus, execute command Points > Find Point (or Points >…
- Creating a quick profile - MDT26Then, we will obtain longitudinal and/or cross section cuts that will immediately indicate the DTM layout status. Thus, we zoom in by…
- Generating contour lines - MDT26We complete the DTM process and start with the contour lines, which possibly suggests some new edition of the triangulation, in order to…
- Labeling contour lines - MDT26If due to the resulting contour we can have a good estimate, we can finish the drawing with the contour line labels, smoothing and status…
- Drawing horizontal alignment - MDT26Regardless of the abovementioned case for the earthwork measurement, and only for the purpose of practicing with the definition of…
- Creating cross sections - MDT26Now, we obtain the cross sections on this alignment. Thus, we execute the option Cross-sections> Create Cross-Sections (or Cross-section>…
- Creating long section - MDT26Then, we will generate the longitudinal profile of the alignment in the same way that we have proceeded with the cross sections. For that…
- Updating profiles - MDT26Here, we will update the drawing of the long section automatically from a modification on the alignment. Thus, we execute the command…
- Realistic representation - MDT26Finally, we are going to make a 3D representation of the surface, for this, we execute the option of Surfaces > Represent As... and select…
- File overview - MDT26Once the job is finished, we list the existing project files in the C:\MDT26_Projects\Tutorial02 directory. The main files are the…