tcpMDT
In this section
- Selecting project - MDT26First, we open the solera.dwg drawing located in directory C:\MDT26_Projects\ Tutorial08. Open solera.prj project as well.
- Generating superelevations - MDT26If you are using AutoCAD 2010 or higher, BricsCAD 21 or higher or ZWCAD 2021 or higher, you can enable the Roads ribbon as you can see in…
- Creating long section - MDT26To create a long section, we execute the command Profile> Create Long Section (or Long Sections> Create> Create Long Section). Select the…
- Creating cross sections - MDT26Likewise, to obtain cross-sections, we run the command Cross-Sections> Create Cross-Sections (or Cross-Sections> Create> Create…
- Defining vertical alignment - MDT26To define the vertical alignment, we will previously define its vertices, without entering curves. For this, we execute the command…
- Defining road section - MDT26Before obtaining the complete cross sections, we must specify the road sections that will be associated with our road. The program…
- Defining widenings - MDT26Finally, we will define the widenings associated with the road we are defining. Hence, we run the command Roads/Segments> Widenings>…
- Drawing long section - MDT26Now we can represent both the long and cross sections completely. To do this in the MDT menu, select the option Road/Segments> Draw Long…
- Modifying vertical alignment - MDT26Then, after drawing the profile we have detected that the curve constant value of the second grade line vertex is not correct. Thus, we…
- Drawing cross sections - MDT26Conversely, to draw the cross sections, choose the command Roads/Segments > Draw Cross Sections (or Roads> Drawing> Cross-Sections), and…