tcpScancyr
In this section
- Cross sections calculation - TNSB3When you have established the alignments and points you may then calculate the cross sections from the points cloud. The algorithm only…
- Quick profile - TNSB3This option provides the possibility of create a cross section from a selection in the point cloud. The selection of a crossing plane is…
- Manual cross sections - TNSB3Using the manual cross section option, a dialog box will appear, indicating a station and deviation list for each cross section. The…
- Openclose cross sections - TNSB3With this command you can open or close a cross sections range. When you open a cross sections range also you can tell how to open it…
- Parallel cross sections - TNSB3If you need to create cross sections which are parallel to those from a project, use the menu "Cross Sections -> Parallel Cross Sections"…
- Joining cross sections - TNSB3You have the option to join two cross sections files by using the "Cross Sections -> Join Cross Sections" menu. First select the cross…
- Elements to be represented - TNSB3Features options which change the representation of the cross sections on the screen. There are options that are only available if there…
- Cross sections options - TNSB3Features options for the selected cross sections. Figure 37 - Options for the selected Cross Section. Station: The cross section that is…
- tcpScancyr advanced create alignment - TNSB3Creates a new alignment from points selected on the cross sections. This option can be accessed from "Tools -> Create alignment from Cross…
- Cross sections filters - TNSB3When you view an individual cross sections you can see if it has errors because the cross sections has points that should be marked as…
- Importing cross sections - TNSB3To import a cross sections file form MDT (*.TRA), you must supply the file, horizontal and vertical alignments because the application…
- Exporting cross sections - TNSB3You can export cross sections in 2D to MDT (*.TRA) file format, or as a points file with the coordinates of each vertex in the 3D. This…
- Export profiles - TNSB3From a cross section file we can generate profiles compatibles with MDT (*.LON). Select a range stations and then choose if we take the…
- Export cross sections to DXF - TNSB3This command exports a cross sections file to a DXF. In order to set up the export, you will see the following dialog box: Figure 43 -…
- tcpScancyr advanced export inner points - TNSB3Export the cross section points that are inside the template. Figure 44 - Export inner points.