[PRO] convert segment to 3D polyline - MDT25

13.26 [PRO] Convert Segment to 3D Polyline

This command draws a 3D polyline from a segment's information, considering the horizontal alignment on ground plan and elevation plan. The program requests the segment file and the discretization interval. It then draws the polyline with these characteristics.

The complementary command to this is Convert 3D Polyline to Segment.

Segments from Alignments and Points

This tool will enable us to create a segment with the alignment and the grade line, in which the grade line is created from the projection of the points on the alignment.

The command will ask for the following information:

Alignment: The alignment of the road or segment.

1. Segment: The segment file in which the information is to be saved, both the alignment and the grade line.

2. Left regression strip: the strip on the left in which the points to be projected on the alignment are located.

3. Right regression strip: the strip on the right in which the points to be projected on the alignment are located.

Each of the alignment vertices will correspond to the projection of one of the points, where the station is the projection in X and Y of the point on the alignment and the height is the height of the projected point.