tcpMDT

Pipe networks - MDT26

Updated on 2 September 2026 tcpMDT Leer en español

In this section

Pipe Networks. Introduction - MDT26In MDT, piping networks are stored in the drawing, and each of the entities created for the management of this module will have their own…
[PRO] Import - MDT26This option will enable us to import piping networks from other formats, gradually incorporating new formats. The option of importing the…
[PRO] Draw Nodes - MDT26This command will enable us to graphically insert nodes at the designated point in the drawing. Once the coordinates have been specified…
[PRO] Create Nodes from Drawing - MDT26This command enables us to create nodes automatically from existing entities in the drawing. It features different possibilities depending…
[PRO] Edit Nodes - MDT26This tool enables us to edit the node and change its characteristics. When executing the initial command, we will be asked whether the…
[PRO] Delete Nodes - MDT26This command enables us to delete all the nodes selected in ground mode. Clicking on it will remove the node in question.
[PRO] Move Nodes - MDT26This tool enables us to move a node in both top view and front view modes. First of all, it will ask us if the node to be moved has been…
[PRO] Find Nodes - MDT26This option enables us to easily locate a node from all those existing in the drawing by name. To do so, when executing the command, the…
[PRO] Change Visibility - MDT26This command changes the visibility state of the selected nodes. When executed, the program prompts the user to select nodes in plan view…
[PRO] List Nodes - MDT26This command will provide us with a list of the nodes of a specific network. We will first be asked for the network from which we wish to…
[PRO] Draw Pipes - MDT26This command will enable us to draw a pipe selecting the existing nodes in the drawing. To do so, there must be nodes in the drawing…
[PRO] Create Pipes from Polylines on Plan View - MDT26This option enables us to automatically define a pipe and its corresponding nodes using a polyline. The nodes will be created…
[PRO] Edit Pipes - MDT26This command enables us to edit the properties of previously defined pipes. To do so, when executing the command, it will ask us for the…
[PRO] Delete Pipes - MDT26This option will enable us to delete both the selected pipe of the drawing and the existing nodes in the pipe. Any nodes shared with…
[PRO] Check Pipes - MDT26This tool enables us to check if the selected pipe complies with the conditions of the settings. The properties to be checked are the…
[PRO] List Pipes - MDT26This command enables us to list the existing pipes in a specific network. We will first be asked for the network we wish to list. After…
[PRO] Draw Profile of Pipe - MDT26This command enables us to draw the profile of a pipe. Once the pipe has been selected, the following window will appear in which to…
[PRO] Draw Cross Sections of Pipe - MDT26This command provides us with the option of designing a piping network on a series of previously drawn cross-sections. To do so, the…
[PRO] Draw 3D Network - MDT26This tool enables us to obtain a 3D drawing of the piping sections and nodes. This drawing is executed using the "cylinder" feature in…
Pipe Vertices Report - MDT26This option will allow us to generate a report in which the characteristics of the Pipe Section will be shown in the Nodes or with the…
[PRO] Plan Angles Report - MDT26With this option we have the possibility to generate a report of the angles between every two consecutive alignments of the axis. This…
[PRO] Export - MDT26This command provides us with the option of exporting the piping network we have designed to another format. The following export formats…
[PRO] Sections in Profile View - MDT26In this group of commands, we have a series of basic tools for the drawing and location of the pipe sections, calculating both the volumes…
[PRO] Define Section - MDT26This option will allow us to define the section of a trench with the associated pipe, so that in the following commands we can both draw…
Define Grade Line - MDT26This command will allow you to define a grade with a certain depth with respect to the long section. The command will request the long…
Suction Cups and Drains - MDT26This tool will allow us to calculate the points in our pipe grade where the suction cups and drains should be placed. The program will…
[PRO] Draw Cuts - MDT26When you select this command, it will successively ask us for the configuration files of the pipe section (TUB) and the segment file to be…
Area Report - MDT26This option will allow us to obtain a list of surfaces in elevation of the section of the pipe with each of the materials defined, in…
[PRO] Volume Report - MDT26This command, like the previous one, will request the definition file of the pipe and the segment file and will show us a complete area…