tcpMDT
In this section
- Cross Sections. Introduction - MDT26In order to obtain cross-section profiles, it is necessary to have 2D drawing objects and height or 3D drawing objects, or alternatively…
- Create Cross Sections - MDT26When this command is executed, cross-sections are obtained from 3D objects or MDT surfaces. There are different methods to obtain them…
- Create Skewed Cross Sections - MDT26This command is useful to generate profiles that are not normal to the horizontal alignment. It is possible to indicate the angle of…
- Create from Several Alignments - MDT26This command works similarly to the command Get Cross Sections with the difference that it generates several cross-sections with the same…
- Create from Several Surfaces - MDT26With this option we can generate several groups of cross-section profiles from several surfaces. When the command is executed, the program…
- Convert Points - MDT26This utility allows one to obtain cross-section profiles from a horizontal alignment and a point cloud. It is extremely useful to convert…
- Convert Cross Sections from Drawing - MDT26This command is particularly useful to obtain the cross-section file in ASCII format from cross-sections represented on the drawing by…
- Convert Profiles on Plan View - MDT26This command will allow us to convert to cross sections a series of lines on the ground plan drawn in the mapping. With this in mind, we…
- Convert Long Section - MDT26From this command we can generate a cross-section file from a profile. When this option is executed, the following window will appear…
- Convert Simple Template - MDT26This command is very useful for generating a cross-section file with a cross-section template that can be quickly associated without the…
- Convert Cross Sections from Cuts - MDT26This command complements Draw Cuts Manually, so that one can generate the information about the previously defined profiles on a file with…
- Input Cross Sections - MDT26This command aims to make the manual input of a series of cross-section profiles easier, in addition to their possible modification. When…
- Find Cross Sections - MDT26Using this command, one can locate the cross-section corresponding to a certain station on a cross-section matrix by zooming around it…
- Cross Sections. Move Stations - MDT26This option allows one to modify the stations or distances to the origin of a cross-section file. After selecting the file to be modified…
- Move Alignment - MDT26This utility enables one to modify the entire contents of the profiles' horizontal alignment position using adjustments to the left…
- Cross Sections. Move Elevations - MDT26This option allows one to modify all the elevation in a cross-section file. By marking the name of the file to be processed on the…
- Extend Cuts - MDT26This tool allows one to extend the ends of the cross-section's cuts from the horizontal alignment to the distance desired. When the…
- Invert Cross Sections - MDT26This option allows one to entirely transform a cross-section profile regarding its direction and sign, so that the initial station becomes…
- Filter Cross Sections - MDT26This tool is used to reduce the number of vertices in a cross-section file. The program requests the file to be processed and the size of…
- Filter Cross Sections by Stations - MDT26This tool will allow us to generate a cross sections file with a certain interval or previously specified stations. It will be very useful…
- Delete Cross Sections - MDT26This command will allow us to remove from the drawing a group of cross sections drawn beforehand. With this in mind, after executing the…
- [PRO] Draw Cross Sections - MDT26When this command is executed, either the natural terrain cross-sections (.TRA extension), skew profiles (extension .TRE) or the segment…
- Draw Multiple Cross Sections - MDT26This command allows one to view the evolution of earthworks on screen by graphically comparing different cross-section files corresponding…
- Add Cross Sections to Drawing - MDT26This option will allow us to draw a file of cross-section profiles on others that are already drawn. This option is very useful, since it…
- Draw on Top View - MDT26Using this command allows one to draw the cross-sections obtained. The dialog box that is displayed when the command is executed is shown…
- Draw Skewed Cross Sections - MDT26This option enables drawing the sections of the skew cross-sections that we have generated with the corresponding command. When the…
- Draw Cuts - MDT26The working of this command is linked to Convert Cross-Sections from Cuts. Its aim is to put together cross-sections by selecting…
- Project Polylines - MDT26This tool allows you to represent the section of 3D polylines in the cross sections. This is widely used in works with pipes, power lines…
- Project Points - MDT26This tool will allow us to project a group of points, previously selected, on cross-sections drawn. When executing the command, it will…
- Project Points on Plan - MDT26This tool is designed to calculate points over the survey from points selected in the drawing of cross sections. It would be really the…
- Label Distances and Elevations in Profile - MDT26Using this option, we can label the distance from the alignment and the elevation of the designated point on the cross section drawn…
- List Cross Sections - MDT26When this option is selected, the usual file selection window appears containing .TRA extension files and the working directory of the…
- Review Cross Sections - MDT26This command allows editing, visualization and modification of cross-section profiles, both for natural terrain (extension .TRA) and for…
- Merge Cross Sections - MDT26This command is used to merge two cross-sections of different methods. The program will display the following window for specifying the…
- Concatenate Cross Sections - MDT26This program option enables merging a set of cross-section files into one only. It is ideal if we have a road divided into several groups…
- Trim Cross Sections - MDT26This command facilitates trimming each of the cuts of a cross-section file using the set of polylines in ground plan as a reference. It…
- Compare Cross Sections - MDT26This command displays a list with the height differences for each station at the different cuts of each cross-section. First it requests…
- Elevations from Long Section - MDT26This command enables changing the elevations of the cross-section cuts in terms of the long section. This option is particularly useful to…
- Insert Polylines - MDT26This utility allows one to insert the references of the polylines entered in the cross-section file selected. The Definition of Blocks…
- Remove Reinforcements from Segment - MDT26This tool will be very useful if we want a segment, to which we have previously defined a Reinforcement, we want to remove the marks of…
- Properties - MDT26This option will allow us to visualize the characteristics of a drawn cross section. Additionally, we have the possibility to indicate if…