Move alignment - MDT25

11.15 Move Alignment

This utility enables one to modify the entire contents of the profiles' horizontal alignment position using adjustments to the left (negative value) or the right (positive value).

When the command is executed, the following dialog box is displayed, where one enters the Origin and Destination files, together with the Displacement to be applied in relation to the horizontal alignment.

MDT automatically creates a backup file of the original file, with the same name and a .BAK extension.

Example: Cross-sections before and after applying a horizontal alignment adjustment of -15.0 m

0.000 -18.520 43.887 TRI 0.000 -33.520 43.887 TRI

0.000 -12.750 44.291 TRI 0.000 -27.750 44.291 TRI

0.000 -8.769 44.612 TRI 0.000 -23.769 44.612 TRI

0.000 0.000 45.318 Alig 0.000 -15.000 45.318 Alig

20.000 -17.105 44.611 TRI 0.000 -15.000 45.318 Alig

20.000 -16.140 44.670 TRI 20.000 -32.105 44.611 TRI

20.000 -11.339 44.055 TRI 20.000 -31.140 44.670 TRI

20.000 -3.832 45.434 TRI 20.000 -26.339 44.055 TRI

20.000 9.316 46.121 TRI 20.000 -18.832 45.434 TRI

40.000 -14.961 43.283 TRI 20.000 -5.684 46.121 TRI

40.000 -9.458 44.159 TRI 40.000 -29.961 43.283 TRI

40.000 -5.009 47.678 TRI 40.000 -24.458 44.159 TRI

40.000 0.000 48.201 Alig 40.000 -20.009 47.678 TRI

40.000 3.462 47.503 TRI 40.000 -15.000 48.201 Alig

40.000 11.611 48.129 TRI 40.000 -11.538 47.503 TRI

40.000 19.677 49.094 TRI 40.000 -3.389 48.129 TRI