[PRO] Earthworks by Fill up to an Elevation - MDT26

Earthworks by Fill up to an Elevation

	Command to execute in the CAD
Vertical menu	MDT26 > Surfaces > Grading > by Fill up to an Elevation
Ribbon menu	Surfaces > Grading > Fill to Elevation
Command line	MDT26_sup_rellenar

This command is designed to calculate, for example, the fill volume of a platform or pond generated previously. The final result will be a new surface with the fill at the specified elevation.

The program will first ask for a point, which must correspond to the area we wish to fill. In the case of a pond, any point in it would suffice. The following dialogue box will then appear.

Elevations: Provides us with information on the minimum, average and maximum elevations, whereby the user will need to specify the fill elevation.

Drawing

• Modify Points: Activating this box will change the points in relation to the new surface to be created.

• Draw Polyline: Draws a polyline on the contour line up to the elevation to be filled.

• Apply Material: the option of assigning a material to the new surface created at the indicated elevation. A material with a texture similar to that of water will be assigned by default and executing Route by Terrain command will provide a realistic representation of the same.

The remaining options are the same as those of the Earthworks by Terrain Elevation command.